Changing Your Approach to Water Heating
These are homes which have many bathrooms. Other types can include commercial buildings. Although these buildings may not be that large in numbers in comparison to the everyday housing market, they are still valuable in providing profit to the heating installer.
Many often decide to take a a simple upsizing approach and fit a bigger storage cylinder.
However, there are alternative options available to the consumer. These options will lead to better happiness for the consumer and the installer.
Continuous-flow water heating technology
This type of technology is called continuous-flow water heating. Traditionally, gas has always been relatively cheap and insulation standards have been low. Therefore, up until now, consumers have not had to worry about water heating being a cost issue. They never sought to pay much attention to design and installation.
Nowadays due to better insulation standards, it is bringing lower heat requirements to the point where year-round heating consumption is about equal to, or even below the DHW requirement. Another factor to take into consideration is that building regulations improvements over the next few years make the economics of water heating even more important.
Changing needs
Consumers are now becoming more aware of what they need and this has greatly impacted their hot water requirement levels. A survey was conducted by a leading manufacturer asking about requirements for a customer's bathroom. Many of the responses received detailed a wish for a better water service.
Many of the consumers wished for more power in the showers, walk in showers, bigger baths, and separate showers. Installers are well aware that consumers are very willing to invest a lot of time and money on the bathroom they want.
Nonetheless, many of them fail to be realistic about whether their water and heating system will actually deliver the service that matches their expectations. Many consumers fail to realise that combis and two shower and bath home cannot cope, particularly during the winter season.
A four person household would put immense pressure on the water usage. A lot of water will get used during the morning rush hour and it is likely that the washing machine and the dishwasher will also be on the go.
However, the problems facing households are just minuscule compared to larger buildings such as commercial buildings. For instance, in a hotel or nursing home, if the hot water supply fails then this could lead to disastrous consequences for all concerned.
There are some manufacturers that can provide a solution to these potential problems. One model is a fanned-flued wall mounted appliance. The main feature is that it can deliver up to 54kWh directly into water with a controlled system that ensures that the water temperature remains within the" of the required flow whatever other demands are made for hot water.
As water usage is higher than ever before, it is time to look for modern alternatives.
About the Author:
You like it? Share it!
0 Comments:
Post a Comment
<< Home